• Main Page
• Features
  • Alerts
  • Alerts - SOS
  • Automated Flight Following (AFF)
  • Device Routing - IP Addresses and Ports
  • Embedded View
  • Facilities
  • Google Earth (KML)
  • Messaging
  • Pro vs Basic Accounts
  • SBD Relaying
• How To
  • Login
  • Add A Group
  • Edit A Group
  • Add An Asset
  • Edit An Asset
  • Add A Place By Address
  • Add A Place By Point
  • Create A GeoFence
  • Measure Distance
  • View All Assets
  • View Message Log
  • OpenPGP Encryption
• Hardware
  • AddValue/SatLink FB150-250
  • Android
  • Beam
  • Blackberry
  • Calamp
  • ClearWatch-250
  • Cobham/Thrane
  • DeLorme
  • FBBTracker
  • Flight Cell
  • GSatMicro
  • Globalstar
  • Inmarsat-C
  • iPhone-iPad
  • Iridium Extreme (9575)
  • Iridium GO!
  • Iridium OpenPort
  • IsatData Pro (IDP)
  • IsatPhone
  • MCG-101
  • NAL Shout Nano
  • Pointer
  • Queclink
  • SkyWave
  • SmartOne
  • SPOT
  • SRT
  • Thuraya XT
  • Wideye iFleetONE
• Software
  • Interface
  • All Pages
  • Categories
  • Navigation Paths
• Admin
  • Administration
  • Create a new Page
  • File Management
  • Login

Thrane FleetBroadband

Note: The FBB Tracker is not needed to track these devices, with the exception of the Sailor 150, Explorer 325 and Explorer 300 when background IP/data is also needed.

Firmware versions that support tracking¶

• Sailor 500
  • All firmware versions
• Sailor 250
  • All firmware versions
• Sailor 150
  • IMPORTANT FIRMWARE UPDATE: Firmware version 1.21 and higher support built in tracking. Allow multiple PDP contexts on SAILOR 150
  • All firmware versions with an exception. A single PDP context is supported on Class 3 BGAN terminals, therefore, if you activate the tracking PDP context you cannot open a second context for background IP or streaming. You must disconnect the tracking PDP context first.
• Explorer 727
  • Firmware 1.13 and higher
• Explorer 325
  • IMPORTANT FIRMWARE UPDATE: Firmware version 1.21 and higher support built in tracking. Allow multiple PDP contexts on EXPLORER 325
  • Firmware 1.13 and higher with an exception. A single PDP context is supported on Class 3 BGAN terminals, therefore, if you activate the tracking PDP context you cannot open a second context for background IP or streaming. You must disconnect the tracking PDP context first.
• Explorer 710
  • Firmware 1.05 and higher
• Explorer 700
  • Firmware 3.07 and higher
• Explorer 500
  • Firmware 3.03 and higher
• Explorer 300
  • IMPORTANT FIRMWARE UPDATE: Firmware version 3.04 and higher support built in tracking. Allow multiple PDP contexts on EXPLORER 300
  • Firmware 3.03 and higher with an exception. A single PDP context is supported on Class 3 BGAN terminals, therefore, if you activate the tracking PDP context you cannot open a second context for background IP or streaming. You must disconnect the tracking PDP context first.
    

===

Step 1: Logging Into Your Device¶

IMPORTANT: You must upgrade to firmware version 1.13 or greater to support this feature

Login to http://192.168.0.01 on the same network as your Fleet Broadband

• Click on “Settings”
  

• Click on “LAN”
  

• Click on “Network User Groups”
  

• Enter the following: Username: admin Password: 1234
  

• Press “Login”
  

Step 2: Configure Settings¶

• Click on “Edit” next to “Default group”
  

• Change “Automatic Activation” to “Enabled”
  

• Press “Apply”
  

• Click on the “Tracking” tab under “Settings” in the menu.
  

• Enter the follow information under “SERVER CONNECTION” For “APN”, select “SIM default”
  

Server IP Address	66.165.183.84
Server Port	7474
Client Port	7475
Encryption Key	82738287465721050827674352518283

• Under “POSITION REPORTS”, select the “Extended” option
  

• For “INTERNAL REPORT”, select “Enabled” and enter 15 minutes
  

• For “DISTANCE REPORT”, select “Enabled”, enter 100 for “When moved” and a time of 5 minutes is recommended for “Max one report per”
  

• Press “Apply”